E. Floors Impact Noise Treatment
Minimum Floor system layer performance of IIC 57 (with our floor underlayment treatment). Floating Floor performance may achieve of up to F-STC 71.
Caution: Do not accept product without proper certification, certified packaging label and minimum 20 years proven installed product at equivalent jobs for durability and safety in buildings environment.
 
 
Commuter Train Subway.
 
 
TV News Studio fully treated with our products.
 
APPROVALS AND RATINGS
 
Fire Ratings
1. Enhanced Application (Applicable for certain
  Countries)
  Non-combustible in accordance with BS 476 Part 4:1970.
2.Standard Application
  Classified as Class 1 Building’s material, Class ‘A’ rating
per ASTM E-84, NFPA-255 and FTC.
 
Thermal Conductivity

Thermal Conductivity per ASTM C-518: 0.0378 W/mK (R=3.807).
* Thermal Resistivity value is tested / measured at ambient temperature.
Our product performs even more efficient at lower and higher than ambient temperature.
* Unlike most competitors who tested with/include backing layer, our product was tested without backing layer, thus result show much more efficient conductivity.
 
Other Tests Result
1. Cohesion & Adhesion – Bond Strength (ASTM E-736):
  Min. >210 times its weight (Force exerted during test >73 LBF,
  Max. Force exerted 84.5 LBF)  Cohesion / Adhesion > 775 psf
2.Test results per ASTM C-1149-02:
  a. Smoldering Combustion: Less than 1% weight loss
    (maximum permissible 15%)
  b. Fungi Resistance: No growth
  c. Moisture Vapor Absorption: % Weight gain = 1.25%
    (maximum permissible 15%)
 
d. Odor Emission: No perceptible
e. Corrosion:
  - Steel = No perforations,
  - Aluminum = No perforations
  - Copper = No perforations
3. Air Erosion:
  Found = 0.017 gm/ft² (Allowable limit = 0.025 gm/ ft²)
 
Standards Compliance
1. ASTM C-1149 Standard Specifications for Self-Supported Spray Applied Cellulosic Insulation
2. ASTM C-739 Moisture Absorption, Odor Emission, Corrosiveness and Smoldering Combustion
3. ASTM C-518 Test Method for Steady-State Thermal Transmissions properties by means of Heat Flow Meter Apparatus (Thermal Conductivity)
4. ASTM E-859 Air Erosion
5. .BS 476 Part 4:1970 Fire test on Building materials and structures - Non combustibility test for Building materials
6. ASTM E-84 Surface Burning Characteristics of Building Materials
7. ASTM E-736 Bond Strength
8. ASTM E-761 Compression Strength
9. ASTM C-423 Standard Test Methods for Sound Absorption and Sound Absorption Coefficient by the Reverberation Method
10. ASTM E-795 Standard Practices for Mounting Test Specimens during Sound Absorption Tests
11. ASTM E-90 Standard Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
12. ASTM E-413 Classification for Sound Insulation Rating (Airborne Sound Transmission)
13. ASTM E-492 Standard Test method for laboratory measurement of Impact Sound Transmission through Floor – Ceiling assemblies using tapping machine
14. ASTM E-989 Standard classification Impact Isolation Class (IIC) rating
15. ASTM E-1332 Classification for Determination of Outdoor-Indoor Transmission Class
16. ISO 240-3:1995 (E) Laboratory Measurements of Airborne Sound Insulation in Buildings and Buildings Elements
17. ISO 717-1:1996 (E) Rating of Sound Insulation in Buildings and Buildings Elements
18. Green Product Certification
     
Other Approvals and Compliance
1. US – EPA (Environmental Protection Agency)
2. Consumer Product Safety Commission (CPSC) – 16 CFR Part 1209
3. OSHA (Occupational Safety and Health Administration)
4. International Code Council (ICC)
5. International Building Code (IBC)
6. International Residential Code (IRC)
7. International Energy Conservation Code (IECC)
8. US Federal Specifications
9. Office of Noise Control
10. TUV SUD PSB, Singapore
11. Bomba, Malaysia
12. LIPI, Indonesia
13. SGS China Approvals:
Thermal: GB/T 10294-2008, Fire: GB/T 20284 & GB/T 8626
Acoustic: GB/T 20247-2006 & GB/T 16731-1997
14. Singapore Environment Council (# 035-053)
15. UL (Underwriters Laboratories)
16. US Department of NAVY Guide Specifications
17. Corps of Engineers Guide Specifications
18. US Federal Defense Logistics Agency
19. IARC (International Agency for Research on Cancer)
20. NTP (National Toxicology Program)
 
* CSI Product’s Specification sheet is available upon request.
 
 
 
     
For further information, please to obtain details
  © 2019 Copyright by AcousticProduct.Net - USA, All rights reserved.